Shimmer walls & Sequin Panels

Dynamic Sequin Panels is the system of decorative panels meant for creation of dynamic “living” structures with moving elements (sequins) activated by air flows.

The basic part of Standard and Pixel panels consists of a lattice matrix panel with mounting holes. Such panel is made of durable highly transparent polymer material. It is very flexible and light (150 grams!).

The basic element of Bit panel is a monolithic support with a mounting hole. Such panel is made of durable highly transparent polymer material. It is very reliable and light (30 grams!).

Movable reflective elements (MRE) or so called “sequins” are presented in three shapes: circle, square, octagon. MRE are made of polymer material having high-grade color mirror coating.

The reliable and flexible material, which is used for manufacturing of the SolaAir decorative panels, is highly resistant to variations of temperature (-40/+70 C), wind gusting to 25 m/sec, precipitations in the form of rain and snow, as well as durable ultraviolet solar radiation.

Each panel has a large number of mounting holes with diameter of 3 mm. The holes are arranged so as a reflective element could overlap the head of a self-tapping screw. The panels can be fixed to the surface with the help of double-sided adhesive tape, self-tapping screws and staples.

Warranty is valid when we install panels. The products warranty period is 2 years under environmental conditions within average Canadian climate.

When the products are used outdoors their serviceability is considerably dependent on the locality of their use. For some regions such period may be 3-5 years, for others 5 and more years. A great number of factors and their combination are of importance for the period of service life of the products – humidity, UV radiation, too high and low temperatures, etc.

If in your project you use dynamic products of the same color as the background, then we recommend to use the reflective elements of circle or octagon shape. Such choice will enhance visibility and recognition of your product and make the whole structure more intensively colored.

When your project requires overlapping the background color of the advertising structure as much as possible, or the background color is different from the panels color, then in such case we recommend to use rectangular shape of reflective elements.

Along each of four edges, the panels have coupling elements of male-female type. Locking of such joints ensure rigid and reliable attachment of several panels to each other.

Due to the fact that any panel picture can be assembled of a group of panels the resulting picture can be used independently (without any rigid support). This advantage is very helpful when such panels are used temporarily for special actions or events, ceremonies, decoration of stages and shop windows.

When using the panels of standard colors, and also the panels made based on the Print technology we recommend to apply the background color similar to the panel color.

We fulfill orders during 1 – 5 working days. Time periods for manufacturing Bit panels, large and wholesale orders are determined individually for each customer.

The panels are easily cleaned with the help of a “static” brush or sponge with microfiber.